--- name: linux-perf-profile description: Deep Linux perf profiling — PMU counters, topdown analysis, flamegraphs, and annotated hotspot drill-down on ARM/Graviton --- # Linux Perf Profiling Deep hardware-level performance analysis using Linux `perf` on this ARM (Neoverse V1 / Graviton3) system. Goes beyond Criterion benchmarks to explain *why* code is slow using PMU counters, topdown decomposition, cache/TLB analysis, and annotated disassembly. ## When to Use - Criterion benchmarks show a regression but the cause is unclear - You need to understand *where cycles are spent* inside a hot function - Investigating cache misses, branch mispredictions, TLB pressure, or stall cycles - Comparing two builds at the microarchitectural level - Generating flamegraphs for visual hotspot identification - After `/bench-compare` finds a regression and you need to explain it ## Prerequisites Ensure a release build with debug info exists: ```bash RUSTFLAGS="-C target-cpu=native -C debuginfo=2" cargo build --release ``` The `-C debuginfo=2` flag is critical — it enables `perf annotate` to map samples back to Rust source lines without impacting optimization. ## Profiling Modes Use the mode that matches your investigation. Modes are ordered from broadest to most focused. --- ### Mode 1: Topdown Overview Get a high-level breakdown of where cycles are going: frontend stalls, backend stalls, or retiring useful work. ```bash perf stat -e cpu_cycles,inst_retired,stall_frontend,stall_backend,stall_backend_mem,br_mis_pred_retired \ ./target/release/scanner-rs ../linux 2>&1 ``` **Derived metrics to compute:** | Metric | Formula | Healthy | Investigate | |--------|---------|---------|-------------| | IPC | `inst_retired / cpu_cycles` | > 2.0 | < 1.0 | | Frontend bound % | `stall_frontend / cpu_cycles × 100` | < 10% | > 20% | | Backend bound % | `stall_backend / cpu_cycles × 100` | < 30% | > 40% | | Backend memory % | `stall_backend_mem / cpu_cycles × 100` | < 15% | > 25% | | Branch mispredict rate | `br_mis_pred_retired / br_retired × 100` | < 1% | > 3% | **Interpretation guide:** - **High frontend stalls** → icache misses, large code footprint, bad branch targets. Check iTLB and L1i below. - **High backend stalls** → waiting on data. Drill into cache/TLB (Mode 3). - **High backend memory stalls** → specifically memory-bound. Check L2/LLC misses. - **Low IPC + low stalls** → instruction mix issue (too many µops per instruction, long-latency ops). --- ### Mode 2: Hotspot Sampling + Flamegraph Record samples and identify which functions consume the most cycles. #### 2a. Record ```bash perf record -g --call-graph dwarf,32768 -F 4999 \ ./target/release/scanner-rs ../linux ``` Flags explained: - `-g --call-graph dwarf,32768` — DWARF-based unwinding (works with Rust, unlike frame pointers). 32KB stack dump covers deep async stacks. - `-F 4999` — ~5000 samples/sec. Use a prime number to avoid aliasing with periodic code. #### 2b. Report (interactive) ```bash perf report --no-children --sort=dso,symbol --percent-limit=1.0 ``` - `--no-children` shows self time only (not cumulative call-tree cost). - `--percent-limit=1.0` hides noise below 1%. #### 2c. Report (text, for Claude analysis) ```bash perf report --no-children --sort=symbol --percent-limit=0.5 --stdio 2>&1 | head -80 ``` Pipe the output here for analysis. #### 2d. Flamegraph ```bash perf script | inferno-collapse-perf | inferno-flamegraph > flamegraph.svg ``` If `inferno` is not installed: `cargo install inferno`. Alternatively: ```bash perf script > perf.script # Then use https://www.speedscope.app/ — drag-and-drop perf.script ``` --- ### Mode 3: Cache & TLB Drill-Down When topdown shows backend/memory stalls, measure the cache hierarchy. ```bash perf stat -e l1d_cache,l1d_cache_refill,l1d_cache_lmiss_rd,l2d_cache,l2d_cache_refill,l2d_cache_lmiss_rd,dtlb_walk,itlb_walk,mem_access \ ./target/release/scanner-rs ../linux 2>&1 ``` **Derived metrics:** | Metric | Formula | Healthy | Investigate | |--------|---------|---------|-------------| | L1d miss rate | `l1d_cache_refill / l1d_cache × 100` | < 5% | > 10% | | L1d → L2 miss rate | `l1d_cache_lmiss_rd / l1d_cache_refill × 100` | < 30% | > 50% | | L2 miss rate | `l2d_cache_refill / l2d_cache × 100` | < 10% | > 20% | | L2 → LLC/DRAM rate | `l2d_cache_lmiss_rd / l2d_cache_refill × 100` | < 20% | > 40% | | dTLB miss rate | `dtlb_walk / mem_access × 100` | < 0.5% | > 2% | | iTLB miss rate | `itlb_walk / l1i_cache × 100` | < 0.1% | > 1% | **Common patterns in this codebase:** - **High L1d misses** → check struct layout, false sharing in concurrent paths, random-access patterns in `TimingWheel` or `SetAssociativeCache`. - **High L2 misses** → working set exceeds L2 (256KB/core on Graviton3). Consider data partitioning or reducing struct sizes. - **High dTLB walks** → large heap allocations scattered across pages. Consider hugepages or arena allocation. - **High iTLB walks** → code bloat from monomorphization or heavy inlining. Check generic instantiation count. --- ### Mode 4: Branch Analysis When topdown shows frontend stalls or branch misprediction issues. ```bash perf stat -e br_pred,br_mis_pred,br_retired,br_mis_pred_retired,inst_retired \ ./target/release/scanner-rs ../linux 2>&1 ``` **Derived metrics:** | Metric | Formula | Healthy | Investigate | |--------|---------|---------|-------------| | Speculative mispredict % | `br_mis_pred / br_pred × 100` | < 2% | > 5% | | Retired mispredict % | `br_mis_pred_retired / br_retired × 100` | < 1% | > 3% | | Branch density | `br_retired / inst_retired × 100` | < 20% | > 30% | To find which branches are mispredicting: ```bash perf record -e br_mis_pred_retired -c 1000 -g --call-graph dwarf \ ./target/release/scanner-rs ../linux perf report --stdio --percent-limit=1.0 2>&1 | head -60 ``` --- ### Mode 5: Annotated Source (Per-Line Costs) Once you've identified a hot function from Mode 2, drill into it at the source-line level. ```bash perf annotate --symbol= --stdio 2>&1 ``` For a specific event: ```bash perf record -e l1d_cache_refill -c 10000 --call-graph dwarf \ ./target/release/scanner-rs ../linux perf annotate --symbol= --stdio 2>&1 ``` This shows the percentage of samples on each source line / assembly instruction. Look for: - Lines consuming > 20% of function samples - Unexpected memory loads (possible bounds checks) - Spilled registers (function too complex for register allocator) --- ### Mode 6: A/B Comparison Compare two builds at the hardware counter level to explain a Criterion regression. #### Step 1: Baseline counters ```bash git stash push -m "changes" RUSTFLAGS="-C target-cpu=native -C debuginfo=2" cargo build --release perf stat -r 3 -e cpu_cycles,inst_retired,stall_frontend,stall_backend,stall_backend_mem,l1d_cache_refill,l2d_cache_refill,br_mis_pred_retired \ ./target/release/scanner-rs ../linux 2>&1 | tee /tmp/perf-baseline.txt ``` #### Step 2: Changed counters ```bash git stash pop RUSTFLAGS="-C target-cpu=native -C debuginfo=2" cargo build --release perf stat -r 3 -e cpu_cycles,inst_retired,stall_frontend,stall_backend,stall_backend_mem,l1d_cache_refill,l2d_cache_refill,br_mis_pred_retired \ ./target/release/scanner-rs ../linux 2>&1 | tee /tmp/perf-after.txt ``` #### Step 3: Diff analysis Compare the two files and compute deltas. Focus on: - Did cycle count increase? If so, did IPC drop or did instruction count increase? - If IPC dropped, which stall category increased? - If instructions increased, was it branch density or memory ops? --- ### Mode 7: Lock Contention & Scheduling For diagnosing contention in async/concurrent code paths. ```bash perf stat -e context-switches,cpu-migrations,page-faults \ -e sdt_libpthread:mutex_entry,sdt_libpthread:mutex_acquired \ ./target/release/scanner-rs ../linux 2>&1 ``` For scheduling latency: ```bash perf sched record ./target/release/scanner-rs ../linux perf sched latency --sort max 2>&1 | head -30 ``` --- ## Event Groups for Copy-Paste Pre-built event sets tuned for this system (ARM Neoverse V1, armv8_pmuv3). **Multiplexing note**: This virtualized Graviton3 environment exposes ~3 simultaneous hardware counters. Do **not** use `{}` group pinning syntax — it will fail with ``. Instead, pass events as a comma-separated list and let `perf stat` multiplex automatically. The kernel time-shares counters and scales results; the `(XX.XX%)` annotation next to each counter shows what fraction of runtime it was active. With workloads running ≥1 second, scaled values are reliable. For maximum accuracy on critical ratios, use `-r 3` (repeat 3x) and keep groups small (3-4 events). ### Set: Topdown ``` cpu_cycles,inst_retired,stall_frontend,stall_backend,stall_backend_mem,br_mis_pred_retired ``` ### Set: L1 Cache ``` l1d_cache,l1d_cache_refill,l1d_cache_lmiss_rd,l1i_cache,l1i_cache_refill,l1i_cache_lmiss ``` ### Set: L2 Cache + TLB ``` l2d_cache,l2d_cache_refill,l2d_cache_lmiss_rd,dtlb_walk,itlb_walk,mem_access ``` ### Set: Branches ``` br_pred,br_mis_pred,br_retired,br_mis_pred_retired,inst_retired,cpu_cycles ``` ### Set: Instruction Mix ``` inst_retired,inst_spec,op_retired,op_spec,cpu_cycles,stall ``` ### Set: Backend Memory ``` stall_backend,stall_backend_mem,l1d_cache_lmiss_rd,l2d_cache_lmiss_rd,mem_access,cpu_cycles ``` ### Precision set (3 events, no multiplexing) When you need exact ratios without scaling, use ≤3 events: ``` cpu_cycles,inst_retired,stall_backend ``` --- ## Output Format Report findings using this structure: ```markdown ## Perf Profile: [target / scenario] ### Environment - CPU: ARM Neoverse V1 (Graviton3), 16 cores - Build: `RUSTFLAGS="-C target-cpu=native -C debuginfo=2"` release - Target: [repo or benchmark name] ### Topdown Summary | Metric | Value | Assessment | |--------|-------|------------| | IPC | X.XX | [good/investigate] | | Frontend bound | X.X% | [ok/high] | | Backend bound | X.X% | [ok/high] | | Backend memory | X.X% | [ok/high] | | Branch mispredict | X.X% | [ok/high] | ### Hotspots (top 5 by self%) | Rank | Symbol | Self % | Module | Likely Cause | |------|--------|--------|--------|--------------| | 1 | func_name | XX.X% | scanner_rs | [explanation] | ### Cache Hierarchy (if relevant) | Level | Accesses | Misses | Miss Rate | Assessment | |-------|----------|--------|-----------|------------| | L1d | X.XXB | X.XXM | X.X% | [ok/high] | | L2 | X.XXM | X.XXM | X.X% | [ok/high] | ### Root Cause Analysis [Narrative explaining what the numbers mean for this specific code. Connect PMU data to source-level patterns. Reference specific lines/functions.] ### Recommendations 1. **[Issue]** at `file:line` — [specific fix with rationale tied to PMU data] - Expected impact: [which metric should improve and by roughly how much] - Validate: `perf stat -e ...` ### Validation Plan [Commands to re-run after applying fixes to confirm improvement] ``` ## Caveats - **Multiplexing**: This virtualized environment supports ~3 simultaneous counters. `perf stat` multiplexes automatically — the `(XX.XX%)` annotation shows sampling duty cycle. With ≥1s workloads, scaled values are reliable. Never use `{}` group pinning. - **DWARF unwinding cost**: `--call-graph dwarf` adds ~5-15% overhead to the profiled process. For tight latency measurements, use `perf stat` instead of `perf record`. - **Kernel symbols**: Some symbols may show as `[kernel.kallsyms]`. These are kernel-side costs (syscalls, page faults). If they dominate, investigate I/O patterns or memory allocation. - **Inlining**: Heavily inlined functions may not appear as separate symbols. Use `perf annotate` on the caller to see inlined code. - **Async runtimes**: Tokio worker threads share names. Use `-t` (per-thread) recording to separate them if needed: `perf record -t `. ## Related Skills - `/bench-compare` — Criterion before/after measurement (use first to detect regressions) - `/perf-regression` — Full regression workflow with acceptance criteria - `/performance-analyzer` — Static code analysis for perf anti-patterns - `/rust-hotspot-finder` — Classify hotspots by risk before profiling

sqlite-review

Scan your own AI components